Payment & Shipping Terms:
|Applicable Brand:||All Outdoor Piezo Electric Printer||Cartridge Capacity:||1000ml|
|Smell:||Low Smell||Original Model:||E16/D16/D18/D32|
|Color:||C/M/Y/K||Place Of Country:||China|
eco solvent ink,
water based pigment ink
No Smell Eco-solvent Ink For Locor And Other Brand Piezo Electric Outdoor Printer
Physical and chemical indicators:
Color: C M Y K LC LM Environmental Esters
Odor: slightly PH value of 6.5-7.8
Viscosity: 3-6 centipoise (ECO-360)
8-12 cps (ECO-512) Flash point 65 ℃
Surface tension 24-36 dyne / cm Filtration accuracy <0.2 microns
Conditions of Use:
1. Temperature: 15 - 30 ° C / 65 - 85 ° F
2. Humidity: 25 - 65%
Locor eco-solvent ink Features:
(1) waterproof, wear and tear is not easy to decolorize.
(2) the use of imported raw materials, good dispersion stability, no plug.
(3) outdoor expressive force lasting , can resist the impact of UV light, to prevent color fading.
(4) does not contain benzene, toluene, xylene, cyclohexanone and other toxic solvents, taste very small.
(5) good adhesion, quick drying.
High quality imported raw materials fine fine fluency
Suitable for continuous printing unique formula does not damage the nozzle
Good drying speed and good compatibility
Professional color processing to restore a good color
1. should be stored at 5-30 ℃;
2. The storage period may be more than 12 months under the above conditions;
3. Ink in the sealed aluminum film should be careful not to let the dust and debris into the ink;
4. When the indoor temperature is too low (below 15 ℃), pay attention to the use of heaters, the temperature should be higher than 28 ℃ cooling measures should be taken.