Payment & Shipping Terms:
|Heat Gun:||3400W Leister Heat Gun||Welding Speed:||1-15m/min(adjustable)|
|Usage:||Weld Pvc Banner||Working Temperature:||20-700degree(adjustable)|
pvc seaming machine,
hot air welding machine
Digital Tarpaulin Banner Welder / Tarpaulin Welding Machine Top 3400C
1. No need glue, use hot air to weld materials
2. Temperature, speed, fan motor speed are adjustable
3. Welder nozzle has a sensor, can make the true temperature accurately
4. High welding quality
specification parameters :
|Machine Name||Seamless LaserPVC , Flex , plastic Banner Welding Machine|
|Other name||Automatic Leister Heat air gun Plastic Welding machine|
|Heat air gun||Import Original 3400W Leister Heat Air Gun from Swiss|
|Voltage||110V / 240 V|
|Temperature scope||20 - 700 degree|
|Welding area||2-5 cm|
|Welding thickness||0.22 - 2 mm|
|Welding Type||automatic welding|
|Frequency||50 - 60 HZ|
1. Make the cloth for seaming flat and tight,. take joiner to accurate (about 2-4cm),Fix both ends by tape or glue on ground.
2. set the temperature and walking speed: Connect the power supply, set the temperature and walking speed according to the thickness of the cloth. Temperature and speed is adjustable. As shown:
3. Turning the heating switch (yellow knob), the machine starts to heat up. Wait for 2 minutes,when actual temperature (PV)approach desire temperature(SV),we can start weld.
4. Welding positioning. Lap welding pressure(working wheels)- wheel edge must be aligned with the upper edge of the banner
4.Lifting the handle, making the working wheel on ground,as the show
6. start welding: pulling the heat gun to position handle and making the nozzle close to ground then move the nozzle to left so that it can be place a right position, at that time, the welding will work automatic.
7. During welding,let hot air nozzle between two overlap pieces. And be make sure hot air nozzle and Rubber wheel walk in straight line.if not,please adjust by handrail.check photo:
8. finishing welding: when we finish these work, pull the handle shake, turn right to move out nozzle until stops rotating nozzle upwards and it is locks.
9. Turn off the switch: when finished, turn off the yellow knob,shut off main power supply when the PV value is less than 50 degree.then we can turn off the power.
Thank you very much for choosing our “Automatic TOP-3400 banner welding”. We believe that this will be your best choice for your business. This equipment is designed professionally for ,sealing film or foil and homogeneous coating and PE-coated webbing belt lap welding that is make in PVC-P,PE,TPO ECB,CSPE,EPDM,PVDF. To help you understand the characters features of this equipment and know how to operate safely and keep in good condition etc.
1. Packing by carton box with foam
2. Packing size : 50cm*34cm*34cm
3. Shipping by express , such as DHL , Fedex or other way .