 |
|
|
|
Semi Automatic Wide Format Cold Lamination Machine With Back Cutting System
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Cots Material: | Anti-sticking Silica Gel | Speed: | 0-15m/min |
|---|---|---|---|
| Max Thickness: | 16mm | Attached: | Air Cylinder |
| Volt: | 110v/220v | Weight: | 250kg |
| Model: | Fayon-1600s | ||
| High Light: | wide format laminator,electric laminating machine |
||
Feiyang Semi Automatic Photo Cold Roll Laminating MachineWith Back Cutting System
Auto Lamination Machine Fayon FY1600S
Fayon Hot Cold Laminator Machinery made by Henan Yingkai Technology Development Co., Ltd.
And We have been produced the Laminators since 2007 with good Technical team and after sales service team. We locate in Zhengzhou city Henan province near Shanghai and Qingdao / Guangzhou Port.
Here I adverse my Hot Laminator with Pics Hot Cold Lamination. singled side .Max temp is 60C with 15 min preheat Double silicone rollers with 130 diameters , and the thickness of silicone is 6mm Max lamination speed is 0—15 min per min Tension system for film which can avoid the wrinkle and snow when lamination Blade system
specification paramenters :
| Model | 1600S |
| Max Width | 1620mm |
| Max Thickness | 35mm |
| Speed | 0--15m/min |
| Temp Range | room temp-60 |
| Lifting Way | Air compressor |
| Heating Way | infrared heating |
| Preheating Time | 10-15min |
| Rated Input Power | 2500w |
| Power | 0.8-1kw/h |
| Rated Input Voltage | 110/220v |
| Weight | 250 kgs |
| Packing Size | 2.35*0.84*0.98 |
More detail with the machines:
Computerized controlling panel
Speed setting / forwards and backwards / Hot Cold lamination setting / Manual and Auto , these functions all on the right of the machine
Air handle for lifting the top roller
See above pics . for upgrading the top roller, operator just put the media in Middle of the roller , and make down the rollers and laminate
The important part of the laminator – Rollers
1. The top roller can be heated, 15 min can reach 60C after setting
2. The low roller stay the room temp.
3. Double rollers are the silicone types , both roller dia is 130C , silicone thickness is 6mm
4. Double rollers are NON STICKER, it is easy to maintain, pls use the alcohol to wipe the surface every week
From the above pics.
1. infrared sensor. When media is not flat when lamination, machine will check and stop lamination, then you need to check the media or tension Knob to adjust
2. Reversible front working tables.
3. The yellow roller hook
You can see a yellow hook at the end of the roller . after finish work , pls hook the top roller. As our roller is silicone , more soft than the rubber.To prevent the deform of Hot Roller.
Tension system
Our machine equip with the tension system, When laminate the rolls works , pls adjust the system to a fine tension, to avoid the winkle and the snow
The emergency switch
Double switches for the machine, no matter you are in front or back of the machine , two sides switch you can press when some lamination mistakes show.
Air-oil separator
Pls adjust the pressure at 0.4MPA, it can provide the good pressure to the media. And this part connect with the air compressor
operation panel:
Other Products
-
FY-1600DA Roll and Flat Laminating Machinery With Air Pump And Back Cutter
-
Fully Automatic 1600mm Hot And Cold Lamination Machine for Advertising Paper Laminating
-
Electric Cold Lamination Machine Low Temperature Slicone Roller With Contour Cutting
-
Double Side Heater Large Format Cold Laminator High Performance 5.5 Feet
-
Fully Automatic Cold Laminating Machine With Multi Function For Linerless Film , Liner Film With Back Cutting Function
-
Automatic Cold Laminating Machine With Linerless Film , Liner Film , Crystal Film