Payment & Shipping Terms:
|Welding Area:||2-6cm||Packing Size:||560*410*420mm|
|Weight:||35KG||Product Name::||Banner Welding Machine|
banner welding equipment,
hot air welding machine
Small Size Weld Machine , Banner Tarpaulin Heat Hot Air Welding Machine
1. The overall weight of the machine increased, with a better effect of pressure!
2. Power switch with front knob type, more convenient operation!
3. Wind gun fixed block, adopt hook-type, easier than the previous hand-operated!
4. Adopt 3400W high-power air gun, the whole power 3600W, to ensure the effect of splicing under the premise of the actual width of the welding widening!
5. Exclusive design, splicing + package rope one round, not only can be stitching, but also package rope / package edge!
6. The king of splicing speed, in order to ensure splicing 520/550 inkjet cloth effect under the premise of the fastest 15 meters per minute, is the inkjet processing plant Gospel!
1. Small size, light weight and easy to carry
2. Digital display function
3. Wind is adjustable
4. Welding speed is fast
5. Do not have fold during the welding process
6. Having press-wheel, it is easy to move
7. Laser precision positioning system
1. Make the cloth for seaming flat and tight,. take joiner to accurate (about 2-4cm),Fix both ends by tape or glue on ground.
2. set the temperature and walking speed: Connect the power supply, set the temperature and walking speed according to the thickness of the cloth. Temperature and speed is adjustable. As shown:
3. Turning the heating switch (yellow knob), the machine starts to heat up. Wait for 2 minutes,when actual temperature (PV)approach desire temperature(SV),we can start weld.
4. Welding positioning. Lap welding pressure(working wheels)- wheel edge must be aligned with the upper edge of the banner
4.Lifting the handle, making the working wheel on ground,as the show
6. start welding: pulling the heat gun to position handle and making the nozzle close to ground then move the nozzle to left so that it can be place a right position, at that time, the welding will work automatic.
7. During welding,let hot air nozzle between two overlap pieces. And be make sure hot air nozzle and Rubber wheel walk in straight line.if not,please adjust by handrail.check photo:
8. finishing welding: when we finish these work, pull the handle shake, turn right to move out nozzle until stops rotating nozzle upwards and it is locks.
9. Turn off the switch: when finished, turn off the yellow knob,shut off main power supply when the PV value is less than 50 degree.then we can turn off the power.
Thank you very much for choosing our “Automatic TOP-3400 banner welding”. We believe that this will be your best choice for your business. This equipment is designed professionally for ,sealing film or foil and homogeneous coating and PE-coated webbing belt lap welding that is make in PVC-P,PE,TPO ECB,CSPE,EPDM,PVDF. To help you understand the characters features of this equipment and know how to operate safely and keep in good condition etc.