Payment & Shipping Terms:
|Largest Welding Width:||3--4cm||Air Pressure:||2500Pa|
|Net Weight:||15Kg||Packing Size:||485×285×280 Mm|
banner welding equipment,
hot air welding machine
2500Pa Air Pressure Banner Welding Machine Automatic Sleep Function High Precision
1. the use of industrial control panels, digital constant temperature control, temperature control for plus or minus 1 degrees Celsius (temperature control is more accurate, the better the effect of splicing)
2. the use of Swiss imports of Leister heating wire, the normal life of 3-4 years, the middle need not change parts.
3. the use of AC fan, wind stronger into, longer life.
4. laser positioning, the development of telescopic handrails, so that stitching perfect, more comfortable to use.
5. automatic sleep function, more cost saving
Voltage / frequency: 220V
Overall power: 2000W
Temperature range: 20-650 DEG C
Welding speed: 1-12m/min
Welding thickness: 0.2-2mm
Max. welding width: 2-5cm
Net weight: 15Kg
Size: 400 * 200 * 250mm
1. first, strain and flatten the picture, and fix the seams (2-4cm) with tape or glue on the floor.
2. connect the power, turn the handle to the left, until the hot air nozzle and the rubber tire is on the straight line, then turn right black knob to adjust the speed, generally marked on the knob to the 2 position, the setting is finished, the handle to the right until the hot air out of the ground to stop walking.
3. set the temperature. The temperature switch opens (right after the golden knob hear clicks down the button in the end), according to the "heating, so according to cooling, according to the fabric thickness and the temperature setting you need temperature, usually at 300-350 DEG C, or take some cloth material, aiming at the wind mouth, which can be immediately melted, there is absolutely not when the temperature of burning phenomenon, also is your set temperature.
4. temperature and speed after commissioning, the machine right wheel rim and the joint is aligned with the actual temperature and wait for the place you set the temperature close to the left handle, until the hot air is completely embedded in the seam, the machine will automatically start walking, stitching.
5. in the splicing process, if the spell when the burning objects, speed up a little bit, or lower the temperature (the two one) can avoid to burnt picture material. But absolutely can not quickly adjust, or else the machine is too fast, resulting in the machine can not go straight, psychological panic, or can not glue and damage the screen.
6. before use, according to your material, find the temperature and speed matching parameters, and then use. Slow down will burn the screen, and soon will not bond firmly, so the temperature and speed match is very important.
7. after the splicing, the handle to the right, until the hot air is completely out of the picture, and then turn off the temperature switch (ie left the gold knob untill it clicks). Static immediately unplug the power plug and turn off the power supply, resulting in waste heat damage to the hot air blower, causing damage to equipment. Be sure to unplug the power plug and the main switch until the actual temperature of the machine reaches a minimum.
8. strictly prohibit the use of rainy days, the work site should be dry and smooth, pay attention to fire prevention. Equipment to be responsible for special personnel, special operations, is strictly prohibited, do not know how to use indiscriminately. The working voltage of equipment: 110V - 220V (two) is forbidden to disassemble, otherwise the consequences.
Maintenance and troubleshooting
The temperature is garbled and the actual temperature is not displayed
Check the temperature probe whether the grounding should remain unconnected with the wind mouth; view probe is broken, repair the sensor line.
Not heating up
Check whether the heating parts fuse and replace the heating parts.
Check that the connection is secure and whether the pipe is broken.
Adjust the wind nozzle parallelism, so that the right side of the wind mouth from the ground 1mm
Speed out of control
Change potentiometer (i.e. black knob)
Increase the temperature or reduce the speed of walking, adjust the parallelism between the wind mouth and the ground.
Random accessories: 10M power cord, a wrench, manual and operation of a set of video discs.
|Welding speed||6-9 m/min|
|Largest welding width||3--4cm|
|Outside dimensions||485×285×280 mm|
|Electric shock protection category||I|
Parts of hot air welding machine